Advanced Water WP5 / 90-150-180- 200°C

Temperature up to C°

Heating capacity in kW

Cooling capacity in kW

Max. flow rate in l/min

Max. pressure in bar

WP5 SETS STANDARDS ! The WP5 is one of the core pieces of the Single water temperature control... mehr

WP5 SETS STANDARDS !

The WP5 is one of the core pieces of the Single water temperature control units. The WP5 units are available in a wide performance range of 90°C / 150°C / 180°C and 200°C, and with almost unlimited options.  Whether for injection moulding, extrusion or numerous other applications, the WP5 series can be used universally. Thanks to its reliability and its features, this series is our contribution to increasing your productivity and improving your uptime.

USER-FRIENDLY Cooling and filling controlled via solenoid valve Configurable automatic... mehr

USER-FRIENDLY

  • Cooling and filling controlled via solenoid valve
  • Configurable automatic filling via KW inflow or separate connection (easily adjustable at the factory via cooling water inflow)
  • Booster pump for system filling (WP5-180/200, optional with WP5-150)
  • Unit ready for connection and mounted on castors, 2 of which are steerable and have brakes

SAFETY 

  • System pressure monitoring by means of pressure transmitter in the expansion tank (WP5-150/180/200)
  • Level monitoring by magnetic float switch
  • System pressure monitoring via pressure transmitter in the expansion tank (WP5-150/180/200) / (only in conjunction with Smart Controller)
  • Safety temperature limiter (STB) in the heater (WP5-200)
  • Pressure gauge in the supply line at the rear of the unit
  • Control cabinet IP54

PROCESS SAFETY / IMPROVEMENT UPTIME

  • Dirt filter in the cooling water inlet, filling and return of the circulation system
  • Flow measurement using the differential pressure principle
  • Flow monitoring by recording the film temperature and the flow rate
  • Dirt trap (circulation)

LIFE TIME  

  • Continuous bypass of the heat exchanger via 3-way motorised control valve (WP5-180/200 - WP5 -150 optional)
  • Control box forced-ventilated
  • Heating control via solid-state relay
  • Heating via stainless steel tubular heating elements made of Incolloy
  • Expansion tank, heater and piping stainless steel

ENERGY SAVING  

  • Circulation circuit thermally insulated (WP5-150/180/200)
  • Well-insulated components save energy and costs
  • Frequency converter (optional)

INTELLIGENT

  • Control and regulation Smart Controller (7" touch display)
  • OPC UA interface (optional)

SERVICE-FRIENDLY

Modular design - easily accessible components - easy to install - easy to service

Reinforced pumps Tool emptying sucking/by means of compressed air Ecotemp Different... mehr
  • Reinforced pumps
  • Tool emptying sucking/by means of compressed air
  • Ecotemp
  • Different interface
  • ... and many more