Advanced Water WP5 / 90-150-180- 200°C

These options are currently not available.

Temperature range up to C°
Heating capacity in kW
Cooling capacity in kW
Max. flow rate in l/min
Max. pressure in bar
Product number: WP5
Product information "Advanced Water WP5 / 90-150-180- 200°C"

WP5 SETS STANDARDS !

The WP5 is one of the core pieces of the Single water temperature control units. The WP5 units are available in a wide performance range of 90°C / 150°C / 180°C and 200°C, and with almost unlimited options.  Whether for injection moulding, extrusion or numerous other applications, the WP5 series can be used universally. Thanks to its reliability and its features, this series is our contribution to increasing your productivity and improving your uptime.

USER-FRIENDLY

  • Cooling and filling controlled via solenoid valve
  • Configurable automatic filling via KW inflow or separate connection (easily adjustable at the factory via cooling water inflow)
  • Booster pump for system filling (WP5-180/200, optional with WP5-150)
  • Unit ready for connection and mounted on castors, 2 of which are steerable and have brakes

SAFETY 

  • System pressure monitoring by means of pressure transmitter in the expansion tank (WP5-150/180/200)
  • Level monitoring by magnetic float switch
  • System pressure monitoring via pressure transmitter in the expansion tank (WP5-150/180/200) / (only in conjunction with Smart Controller)
  • Safety temperature limiter (STB) in the heater (WP5-200)
  • Pressure gauge in the supply line at the rear of the unit
  • Control cabinet IP54

PROCESS SAFETY / IMPROVEMENT UPTIME

  • Dirt filter in the cooling water inlet, filling and return of the circulation system
  • Flow measurement using the differential pressure principle
  • Flow monitoring by recording the film temperature and the flow rate
  • Dirt trap (circulation)

LIFE TIME  

  • Continuous bypass of the heat exchanger via 3-way motorised control valve (WP5-180/200 - WP5 -150 optional)
  • Control box forced-ventilated
  • Heating control via solid-state relay
  • Heating via stainless steel tubular heating elements made of Incolloy
  • Expansion tank, heater and piping stainless steel

ENERGY SAVING  

  • Circulation circuit thermally insulated (WP5-150/180/200)
  • Well-insulated components save energy and costs
  • Frequency converter (optional)

INTELLIGENT

  • Control and regulation Smart Controller (7" touch display)
  • OPC UA interface (optional)

SERVICE-FRIENDLY

Modular design - easily accessible components - easy to install - easy to service

  • Reinforced pumps
  • Tool emptying sucking/by means of compressed air
  • Ecotemp
  • Different interface
  • ... and many more
File Category Size Filetype
WP5 Bruchure GB Produkt-Downloads 7.57 MB pdf
Datenblatt WP5 (DE) Produkt-Downloads 53.71 KB pdf
Data sheet WP5 (EN) Produkt-Downloads 50.25 KB pdf
WP5 Prospekt D Produkt-Downloads 7.63 MB pdf

Accessory Items

SFC water manifold SEPARATE
The separate SFC water distributor is for various single temperature control systems with SSC controller. The variant can be operated independently of a single temperature control unit with SSC controller. In this case, the SSC unit controller controls the unit and water distributor.
SFC water manifold ATTACHMENT
In the surface-mounted version, the Smart Flow Control water distributor is mounted directly on the temperature control unit. The SSC unit controller controls the unit and water manifold

 

The illustrations and drawings, size, weight, consumption, performance, chemical and physical data are always approximate.