WP4-180-18-120 SN 250471 (used)

WP4.000558

Temperature: 180 °C

Heating capacity: 18 kW

Cooling capacity: 120 kW

Flow rate (max): 73 l/min

Delivery pressure (max): 6 bar

Hydraulic features:

- Bypass between flow and return with reduced cross-section

- Level monitoring via magnetic float switch

- Pressure gauge in flow at rear of device

- Flow measurement using differential pressure principle

- Pressure booster pump for system filling

- Flow monitoring by detecting the flow rate

- Strainer in the cooling water inlet and in the return of the circulation system

- Circulation circuit thermally insulated

Electrical features:

- Smart Controller Plus control and regulation unit (7" touch display)

- SSR heating control

- IP54 switch box, externally ventilated

General features:

- Expansion tank, heater, and piping made of stainless steel

- Heating via stainless steel tubular heating elements made of Incoloy

- Strainer

Selected options:

- Pressure gauge on the flow

- Pressure booster pump for increasing the make-up pressure (M.BP.WP4)

- Continuous bypass of the heat exchanger with 3-way valve

- Professional package consisting of:

Smart Controller Plus

Frequency converter

Pressure sensor

- Tool emptying using compressed air with check valve, solenoid valve, compressed air connection, pulse via control and regulation unit, overflow into cooling water + pressure relief compressed air connection hose connection 10 mm

- Separate water outlet for tool emptying using compressed air Connection: 14 mm hose connection

- Ecotemp

- Cyclical switching from external operation to bypass operation

- Potential-free signal from external to 3-pin HARTING plug connection for injection cycle

- Optional normal operation / EcoTemp operation

- Current interface 20mA TTY

- Euromap 82 based on OPC UA, RJ45 connection in front door (SSC.IFOPC)

- 32 A plug/CEE fully assembled