SINGLE Energy Calculator

Discover your savings potential

Clear focus on CO2 reduction,
energy efficiency and cost savings

Calculate now! More about Energy Efficiency

SINGLE Products at a glance …

Advanced N1-150-18-80 SN191226

Model: Advanced N1-150-18-80 Type: Used device / rental device Year of manufacture: 2019 Serial number: 191226 EQUIPMENT Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Flow measurement using the differential pressure principle (flow measurement not available with basic package or ‘Base’ product line) - Level monitoring via magnetic float switch - Automatic temperature-dependent system closure - Flow monitoring by recording the surface temperature of the heating element and the flow rate - Bypass between flow and return with reduced cross-section - Dirt filter in the cooling water supply and in the return of the circulation system - Automatic filling via cooling water at 90°C and 150°C (via separate filling connection if without cooling) Function Equipment electr: - Regulation and control unit Smart Controller (7’ touch display) - Heating control via solid-state relay - IP54 switch box General equipment: - Corrosion-resistant components (VA, MS) - Heating via stainless steel tubular heating elements made of Incolloy - Device mounted on castors and ready for connection

Advanced N1-90-18-80 SN153521

Product information “Advanced N1-90-18-80 SN153521” Model: Advanced N1-90-18-80 Type: Used appliance / Rental appliance Year of manufacture: 2015 Serial number: 153521 EQUIPMENT Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Flow measurement in differential pressure principle (90°C: in eddy current principle) - Level monitoring via magnetic float switch - Automatic temperature-dependent system closure (not at 90°C) - Flow monitoring by recording the heating element surface temperature and the flow rate - Dirt filter in the cooling water inflow and in the return of the circulation system - Automatic filling via cooling water at 90°C - Devices up to 90°C additional manual filling via filler neck (switchable manual/automatic) Function Electrical equipment: - SCT Standard regulation and control unit (7” touch display) - Heating control via solid-state relay - IP54 switch box General equipment: - Corrosion-resistant components (VA, MS) - Heating via stainless steel tubular heating elements made of Incolloy - Device mounted on castors and ready for connection

Advanced NS-150-24-50 SN171280

Model: Advanced NS-150-24-50 Type: Used device / rental device Year of manufacture: 2017 Serial number: 171280 EQUIPMENT Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Flow measurement in differential pressure principle (90°C: in eddy current principle) - Level monitoring via magnetic float switch - Flow monitoring by recording the heating element surface temperature and the flow rate - Bypass between flow and return with reduced cross-section - Dirt filter in the cooling water supply and in the return of the circulation system - Automatic filling via cooling water - Separate automatic filling with dirt trap Electrical functional equipment: - SCT standard regulation and control unit (7” touch display) - Heating control via solid-state relay - IP54 switch box

Advanced Water WP4 / 90-150-180-200°C

EFFICIENT PERFORMANCE It is the inner values that matter: In the WP4 series we use only high-quality materials and innovative technology. Stainless steel, non-ferrous metal and well thought-out construction ensure a long service life. Intelligent control allows the WP4 devices to work with maximum safety and efficiency. The WP4 - water temperature control units for applications and requirements in the medium to upper performance range and temperatures up to 200 °C are particularly common in plastic injection moulding, but are also used in other processes. They are suitable for temperature control of high quality applications and allow documentation of process parameters.Energy-efficient and CO2-saving This product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Advanced Water WP5 / 90-150-180- 200°C

WP5 SETS STANDARDS ! The WP5 is one of the core pieces of the Single water temperature control units. The WP5 units are available in a wide performance range of 90°C / 150°C / 180°C and 200°C, and with almost unlimited options. Whether for injection moulding, extrusion or numerous other applications, the WP5 series can be used universally. Thanks to its reliability and its features, this series is our contribution to increasing your productivity and improving your uptime.Energy-efficient and CO2-saving This product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Chill Advanced C-14- L/W (-5..+30 °C)

The cooling systems in the Chill Advanced product family are designed for industrial applications that require liquid cooling. With their own cooling circuit and an average cooling capacity of 14 kW at a flow temperature of 10 °C, the units are versatile and cover a wide range of applications in various industrial sectors. The open and contamination-free systems are characterized by the highest quality and process reliability. Thanks to numerous hydraulic, electrical and control options, they can be adapted to specific requirements and operating conditions .

Chill Advanced C-20-L/W (-5..+30°C)

The cooling systems in the Chill Advanced product family are designed for industrial applications that require liquid cooling. With their own cooling circuit and an average cooling capacity of 20 kW at a flow temperature of 10 °C, the units are versatile and cover a wide range of applications in various industrial sectors. The open and contamination-free systems are characterized by the highest quality and process reliability. Thanks to numerous hydraulic, electrical and control options, they can be adapted to specific requirements and operating conditions.

Chill Advanced C-25-L/W (-5..+30°C)

The cooling systems in the Chill Advanced product family are designed for industrial applications that require liquid cooling. With their own cooling circuit and an average cooling capacity of 25 kW at a flow temperature of 10 °C, the units are versatile and cover a wide range of applications in various industrial sectors. The open and contamination-free systems are characterized by the highest quality and process reliability. Thanks to numerous hydraulic, electrical and control options, they can be adapted to specific requirements and operating conditions.

Chill Advanced C-40-L/W (-5..+30°C)

The cooling systems in the Chill Advanced product family are designed for industrial applications that require liquid cooling. With their own cooling circuit and an average cooling capacity of 40 kW at a flow temperature of 10 °C, the units are versatile and cover a wide range of applications in various industrial sectors. The open and contamination-free systems are characterized by the highest quality and process reliability. Thanks to numerous hydraulic, electrical and control options, they can be adapted to specific requirements and operating conditions.

Chill Compact C-01 -L/W (-5..+30°C)

The compact cooling system Chill Compact C-1 - L/W serves all applications that require liquid cooling in a small capacity range. With their own cooling circuit, they are used in small and laboratory processes as well as special applications in all industrial sectors. Highest quality and process reliability characterize the open and contamination-free systems, which can be designed with a wide range of options to meet special requirements and operating conditions. The Chill Compact C-1-L/W is available in two cooling types - air or water-cooled!

Chill Compact C-02-L/W (-5..+30°C)

The compact cooling system Chill Compact C-2- L/W serves all applications that require liquid cooling in a low output range. With their own cooling circuit, they are used in small and laboratory processes as well as special applications in all industrial sectors. Highest quality and process reliability characterize the open and contamination-free systems, which can be designed with a wide range of options to meet special requirements and operating conditions. The Chill Compact C-2-L/W is available in two cooling types - air or water-cooled!

Chill Compact C-04-L/W (-5..+30°C)

The compact cooling system Chill Compact C-4- L/W serves all applications that require liquid cooling in a small capacity range. With their own cooling circuit, they are used in small and laboratory processes as well as special applications in all industrial sectors. Highest quality and process reliability characterize the open and contamination-free systems, which can be designed with a wide range of options to meet special requirements and operating conditions. The Chill Compact C-4-L/W is available in two cooling types - air or water-cooled!

Chill Compact C-06-L/W (-5...+30°C)

The compact cooling system Chill Compact C-6- L/W serves all applications that require liquid cooling in a low output range. With their own cooling circuit, they are used in small and laboratory processes as well as special applications in all industrial sectors. Highest quality and process reliability characterize the open and contamination-free systems, which can be designed with a wide range of options to meet special requirements and operating conditions. The Chill Compact C-6-L/W is available in two cooling types - air or water-cooled!

Chill Compact C-09-L/W (-5 ..+30°C)

The compact cooling system Chill Compact C-9- L/W serves all applications that require liquid cooling in a small capacity range. With their own cooling circuit, they are used in small and laboratory processes as well as special applications in all industrial sectors. Highest quality and process reliability characterize the open and contamination-free systems, which can be designed with a wide range of options to meet special requirements and operating conditions. The Chill Compact C-9-L/W is available in two cooling types - air or water-cooled!

Chill Compact C-1-L SN 211990

Model: Chill Compact C-1-L SN: 211990 Type: Rental unit Technical data: Flow temperature range: +5°C to +30°C Delivery rate (max.) 27 ltr/min Delivery pressure (max.) 4.5 bar Motor power 0.35 kW Version Air-cooled: -air volume: 1,000 m³/h -Number of fans: 1 piece -max. air inlet temperature: +42°C Equipment: - SBC-T regulation and control unit - Setpoint and actual value display, alarm display and many other features - Fully hermetic reciprocating compressor - Drainage device - Corrosion-resistant components (stainless steel / non-ferrous metal) - Strainer installed in the return line in the circulating medium - Level monitoring by float switch - Bypass line between flow and return as pump protection - High and low pressure limiter in accordance with DIN EN 3

Chill Plus CH 03-L/ CH 3-L-2C (+10..+90°C)

Chill Plus series cooling units have their own cooling circuit and a wide range of applications. They combine the Chill Compact and Chill Advanced series with the water temperature control units up to 90°C and are ideal for processes with higher temperatures where no central cooling is available. Highest quality and process reliability characterize the open and contamination-free systems, which can be designed with a wide range of options to meet special requirements and operating conditions.

Chill Plus CH-06-L/CH6 L-2C (+10..+90°C)

Chill Plus CH-09-L/CH9 L-2C (+10..+90°C)

Chill Plus CH-14-L /CH14 L-2C ( +10...+90°C)

Chill Plus CH-20-L/CH20-L-2C (+10..90°C)

Chill Plus CH-25-L/CH25L-2C (+10..+90°C)

CHILLER SPECIAL SOLUTIONS

Customized chiller solutions for your perfection ! In a world where standard solutions are not enough, individual approaches are the key to success. We focus on your needs. With our claim “For your perfection”, we develop and implement customer-specific appliances and solutions in the refrigeration sector that are perfectly tailored to your requirements. Whether you need a single appliance or a small series - our expertise and your trust create unique, efficient and innovative refrigeration solutions that meet the highest standards. We work with you to plan every detail in order to develop tailor-made appliances that meet your exact requirements. You can rely on our experience and commitment. Contact us and let us work together to realize the perfect solution for your refrigeration requirements.

Compact TK-90-9-24 SN171279

Model: Compact TK-90-9-24 Type: Used device / rental device Year of construction: 2017 Serial number: 171279 EQUIPMENT Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Switchover option: Manual filling (at the filler neck) / automatic filling via cooling water (via separate filling connection with dirt trap, if without cooling) - Level monitoring via magnetic float switch - Dirt filter in the cooling water inlet and in the return of the circulation system - Reversing circuit for leak-stop operation (not applicable for return flow protection and tool emptying compressed air) Electrical functional equipment: - SBC-T regulation and control unit (3.5” touch display) - Hybrid SSR heating control (up to 415V), above SSR - Control box IP54 - Heating capacity: See order confirmation General equipment: - Corrosion-resistant components (VA, MS) - Heating via stainless steel tubular heating elements made of Incolloy - Device mounted on castors and ready for connection

Compact TK-90-9-50 SN210688

Model: Compact TK-90-9-50 Type: Used machine / rental machine Year of construction: 2021 Serial number: 210688 EQUIPMENT Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Switchover option: Manual filling (at the filler neck) / automatic filling via cooling water (via separate filling connection with dirt trap, if without cooling) - Level monitoring via magnetic float switch - Dirt filter in the cooling water inlet and in the return of the circulation system - Reversing circuit for leak-stop operation (not applicable for return flow protection and mould draining compressed air) Electrical functional equipment: - SBC-T regulation and control unit (3.5’ touch display) - Hybrid SSR heating control (up to 415V), above SSR - IP54 switch box General equipment: - Corrosion-resistant components (VA, MS) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors and ready for connection

Compact Water WK4 / 90-150-160 °C

The compact water temperature control systems for applications and requirements in the medium performance range and temperatures up to 160 °C are used particularly frequently in plastic injection moulding, but also in other processes. They are suitable for temperature control of high-quality applications and allow process parameters to be documented. The WK4 series are equipped for operation far above the atmospheric boiling point with temperatures up to 160 °C. They meet the highest safety requirements. The systems are extremely compact and consist exclusively of high-quality components.Energy-efficient and CO2-saving This product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link : Learn more

Compact Water Tank TK - (IM090I) Stock unit - Available immediately !

Water Tank TK 90-9-50 (IM090I) - Stock unit - Available immediately !"Storage unit - Immediately available ! The TKN is a 90°C tank - temperature control unit. The compact temperature control unit is for applications and requirements in the small to medium performance range. This unit is often used for plastic injection molding, but also for other applications.

Compact Water Tank TKS / 90 °C

In contrast to heat-transfer oil, water used as a circulating medium provides numerous physical and economic benefits – particularly for high operating temperatures. The heat transfer characteristics of water are far superior to those of oil: its high specific heat transfer capacity is second to no other liquid media. Water also provides many ecological benefits.

Compact Water Tank WT3 (IM090J) 90-9-50 - Lagergerät sofort verfügbar !

The new WT3 series offers high-tech in the smallest space and convinces with highest reliability, robustness and energy efficiency in the 90 degree class. Sustainability and energy efficiency played a major role in the design. In addition to intelligent control, the units feature a flow-optimized design. A special focus was also placed on the thermal insulation of the relevant components Energy-efficient and CO2-savingThis product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Compact Water Tank WT3 / 90 °C

The new WT3 series offers high-tech in the smallest space and convinces with highest reliability, robustness and energy efficiency in the 90 degree class. Sustainability and energy efficiency played a major role in the design. In addition to intelligent control, the units feature a flow-optimized design. A special focus was also placed on the thermal insulation of the relevant componentsEnergy-efficient and CO2-saving This product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Compact Water Tank WT4 - 90 °C

The new WT4 series offers high-tech with maximum reliability, performance, robustness and energy efficiency in the 90 °C class. Sustainability and energy efficiency played a major role in the design. In addition to the intelligent control system, the appliances have a flow-optimized design. A special focus was also placed on the thermal insulation of the relevant components.

Compact Water Tank WT7

Sustainability and energy efficiency are the focus of the WT7 - the construction and design are designed accordingly. The WT7 comes with extensive standard equipment with numerous well thought-out functions. In addition, there is a comprehensive range of matching options. The WT7 water temperature control unit - compact performance redefined. With impressive standard equipment and a wide range of options, the WT7 sets new standards in energy efficiency and versatility. The modular design ensures easy maintenance, while robustness and energy efficiency provide a sustainable solution. Maximum performance in the smallest space - that's the WT7Energy-efficient and CO2-saving This product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Compact Water WK3 / 90-100-150-160-180 °C

The compact water-operated temperature control systems for applications and requirements in the small and medium capacity range up to 180 °C are predominantly used for injection moulding applications but also for other processes. They are ideal for temperature control during the production of high-quality articles and allow a documentation of process parameters.In contrast to heat-transfer oil, water used as a circulating medium provides numerous physical and economic benefits – particuarly for high operating temperatures. The heat transfer characteristics of water are far superior to those of oil: its high specific heat transfer capacity is second to no other liquid media. Water also provides many ecological benefits.The WK3 sizes of the Water Compact product family are equipped for operation far above the atmospheric boiling point with temperatures of up to 180 °C. They meet the most stringent safety requirements. The systems are extremely compact and are built exclusively with high-quality components.Energy-efficient and CO2-saving This product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Compact Water WK3 (IM160E) Stock unit - Immediatley available !

Stock unit - Immediately available ! The compact water temperature control system WK3 IM160E is designed for applications and requirements in the small to medium performance range isparticularly common in plastic injection molding, but also in other processes in use. They are suitable for temperature control of high-quality applications and allow documentation of process parameters. Compared to heat transfer oil, water as a circulating medium offers numerous physical and economic advantages - especially at higher operating temperatures. For example, water has a much better heat transfer performance than oil: its high specific heat capacity is not even approached by any other liquid. Water as a temperature control medium also offers many advantages from an ecological point of view. The WK3 sizes of the Water Compact product family are designed for operation well above the atmospheric boiling point. They meet the highest safety requirements. The systems are extremely compact and consist exclusively of high-quality components. Energy-efficient and CO2-savingThis product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Compact Water WK3 (IM160F) Stock unit - Immediatley available !

Stock unit - Immediately available ! The compact water temperature control system WK3 160-9-50 is designed for applications and requirements in the small to medium performance range and temperatures up to 180 °C are particularly common in plastic injection molding, but also in other processes in use. They are suitable for temperature control of high-quality applications and allow documentation of process parameters. Compared to heat transfer oil, water as a circulating medium offers numerous physical and economic advantages - especially at higher operating temperatures. For example, water has a much better heat transfer performance than oil: its high specific heat capacity is not even approached by any other liquid. Water as a temperature control medium also offers many advantages from an ecological point of view. The WK3 sizes of the Water Compact product family are designed for operation well above the atmospheric boiling point. They meet the highest safety requirements. The systems are extremely compact and consist exclusively of high-quality components.

Compact Water WK4 (IM160G) Stock unit !

K4-160-18-80 (IM160G) Stock unit Available for immediate delivery ! The WK4 series has been designed with a strong focus on energy efficiency, robustness and intelligent control to ensure reliable processes. The compact water temperature control systems for applications and requirements in the medium performance range and temperatures up to 160 °C are used particularly frequently in plastic injection molding, but also in other processes. They are suitable for temperature control of high-quality applications and enable documentation of process parameters.The WK4 sizes of the Water Compact product family are equipped for operation well above the atmospheric boiling point with temperatures up to 160 °C. They meet the highest safety requirements. The systems are extremely compact and consist exclusively of high-quality components.

Compact WK4 160-18-80 SN 233939

Model: Compact WK4-160-18-80 SN: 233939Type: Rental appliance Technical data: Temperature max: 160° Medium: Water Heating capacity: 9/18 kW Cooling capacity: 80 kW Max. delivery rate: 57/min Max. delivery pressure: 6.0 bar Dimensions: 780mm x 305mm x 705 mm Weight approx.: 72-90 kg (depending on version) Hydraulic functional equipment - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water supply - Filling can be changed to separate connection (standard for appliances without cooling) - Bypass between flow and return with reduced cross-section - Level monitoring via magnetic float switch - Automatic temperature-dependent system closure (from 150°C) - Display of flow pressure via pressure gauge on the rear of the appliance - Flow monitoring by recording the film temperature, temperature safety device in heater - Dirt filter in the cooling water supply, filling and return of the circulation system - Insulation of all heat-bearing hydraulic components - Booster pump (from 160°C) Electrical functional equipment - Smart Controller 7” touch display regulation and control unit - SSR heating control unit - IP54 switch box, externally ventilated - Heating output in kW: 9 or 18kW (at nominal voltage) General equipment - Corrosion-resistant components (VA, MS) - Heating via stainless steel tubular heating elements made of Incolloy - Device mounted on castors and ready for connection

D0 180-9-20 Ölgerät SN 231008

D0 180-9-20 Oil unit SN 231008 Temperature range up to °C 180 Heating output in kW 9 Cooling capacity in KW 20 Max. pressure in bar 6 Delivery rate (l/min) 45 Product information Model: D0 180-9-20 Oil device Medium: Oil Type: Rental unit Year of manufacture: 2023 Serial number: SN 231008 Equipment Hydraulic functional equipment: - Bypass between flow and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by recording the surface temperature of the heating element and the flow rate - Dirt filter in the cooling water supply, filling and return of the circulation system - Monitoring of the flow temperature by electronic safety temperature limiter - External oil filler neck Electrical functional equipment - Smart Controller regulation and control unit (7’ touch display) - Hybrid SSR heating control unit - IP54 switch box, externally ventilated General equipment - Stainless steel pipework and tank, steel heat exchanger jacket, CuNi10Fe tube bundle - Heating via instantaneous water heater

easitemp 150 2.0 - 150 °C - Sofort lieferbar !

With easitemp150, we concentrate on the essentials when it comes to temperature control. In many industrial applications, temperatures up to a maximum of 150°C are sufficient. In this segment, SINGLE easitemp150 convinces with good features and highest precision in a compact design. With easitemp 150, you make no compromises in terms of robustness, quality and safety.Thus, we guarantee maximum continuous running capability with economical operation.

easitemp 6-95 2.0 / 95 °C / Sofort Lieferbar !

The new easitemp 95 series is concentrating on what's important. In many industrial applications temperatures of 95°C. In this segment, SINGLE easitemp impresses with equipment and highest precision in a compact design. The easitemp series includes all the technological functions that characterize SINGLE temperature control technology. This ensures maximum continuous operation with economical operation.

Gebraucht WT3 90-4-50 SN231755

Modell: WT3 90-4-50 Typ: Messegerät Baujahr: 2023 Seriennummer: 231755 TECHNISCHE DATEN Temperatur: 90 °C Medium: Wasser Heizleistung: 4 kW Kühlleistung: 50 kW Förderleistung max.: 40 l/min Förderdruck max.: 3,8 bar Abmessungen: 715 mm x 265 mm x 563 mm Gewicht: 55 kg AUSSTATTUNG Funktionsausstattung hydraulisch: · Kühlung und Befüllung gesteuert über Magnetventil · automatische Befüllung über Kühlwasser (über separaten Befüllanschluss mit Schmutzfänger, falls ohne Kühlung)· · Schmutzfilter im Kühlwasserzufluss und im Rücklauf des Umlaufsystems · Wendeschaltung für Leckstoppbetrieb (entfällt bei Rücklaufsicherung und · Werkzeugentleerung Druckluft) · Niveauüberwachung durch Magnet-Schwimmerschalter Funktionausstattung elektrisch: · Regel- und Steuereinheit SBC-T (3,5" Touch-Display) · Heizungssteuerung Hybrid SSR (bis 415V), darüber SSR · Schaltkasten IP54 · Heizleistung: Siehe Auftragsbestätigung Allgemeine Ausstattung: · Korrosionsbeständige Bauteile (VA,MS) · Heizung über Edelstahl-Rohrheizkörper aus Incoloy · Gerät auf Rollen montiert und anschlussfertig · Isolierung um Tank und Wärmetauscher geschäumtes Material

Mini WM3 / 90 - 150 - 160 °C

SMALL FORMAT. STRONG PERFORMANCE. MINI WM3 SERIES High tech in the smallest space. The new SINGLE Mini WM3 series convinces in the demanding performance class up to 160° C with maximum precision and reliability.With their compact design, the WM3 mini temperature control units take up extremely little space in production. All in proven SINGLE quality. This means: long service life and low energy consumption. Mini WM3 - the state-of-the-art temperature control unit. Energy-efficient and CO2-savingThis product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Mini WM3 IM150A Stock unit - Available immediately

MINI WM3 IM150A - Stock unit - Available immediately !SMALL FORMAT. STRONG PERFORMANCE. High tech in the smallest space. The new SINGLE Mini WM3 series convinces in maximum precision and reliability. With their compact design, the WM3 mini temperature control units take up extremely little space in production. All in proven SINGLE quality. This means: long service life and low energy consumption. Mini WM3 - the state-of-the-art temperature control unit. Energy-efficient and CO2-savingThis product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Mini WM3 IM150A Stock unit - Available immediately

MINI WM3 IM160H - Stock unit - Available immediately !SMALL FORMAT. STRONG PERFORMANCE. High tech in the smallest space. The new SINGLE Mini WM3 series convinces in maximum precision and reliability. With their compact design, the WM3 mini temperature control units take up extremely little space in production. All in proven SINGLE quality. This means: long service life and low energy consumption. Mini WM3 - the state-of-the-art temperature control unit.

Mini WM3 IM160J Stock unit - Available immediately

MINI WM3 IM160J - Stock unit - Available immediately !SMALL FORMAT. STRONG PERFORMANCE. High tech in the smallest space. The new SINGLE Mini WM3 series convinces in maximum precision and reliability. With their compact design, the WM3 mini temperature control units take up extremely little space in production. All in proven SINGLE quality. This means: long service life and low energy consumption. Mini WM3 - the state-of-the-art temperature control unit. Energy-efficient and CO2-savingThis product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Oil Advanced D0 / 180 - 300 °C

Compact oil-operated temperature control systems are recommended for applications that rule out water-operated systems due to high temperature requirements. The Oil Compact systems offer the benefit of operating without pressure blanketing. Distinguished by their keen price/performance ratio, these compact systems are suitable for a variety of processes and tasks in the lower capacity range. With their high reliability and precision they accommodate many options and equipment variations to meet every requirement.

Oil Advanced D1 / 300 - 350 °C

High-temperature oil-operated temperature control systems for temperatures up to 350 °C are recommended for applications that rule out other temperature control media due to high temperature requirements. Thanks to its wide variety of options for capacity, temperature range and dimensions, the Oil Advanced product family is suitable for many different processes and requirements within a wide capacity range. With its virtually unlimited amount of options and equipment variations, maximum reliability and precision, the systems meet every demand. General

Oil Advanced D2 / 300 - 350 °C

Oil Advanced D3 / 300 - 350 °C

Oil Advanced D4 / 300 - 350 °C

SFC water manifold ATTACHMENT

In the surface-mounted version, the Smart Flow Control water distributor is mounted directly on the temperature control unit. The SSC unit controller controls the unit and water manifold

SFC water manifold SEPARATE

The separate SFC water distributor is for various single temperature control systems with SSC controller. The variant can be operated independently of a single temperature control unit with SSC controller. In this case, the SSC unit controller controls the unit and water distributor.

SFC Watermanifold Alone

The SFC water manifold is flexible and can be used anywhere. The stand-alone variant is a self-sufficient unit with water distributor and control box. The variant can be operated with any temperature control unit.

Testing CHT 5 (-45...+130°C)

Chill Plus series cooling systems have their own cooling circuit and a large cooling capacity range from 200 to 1000 kW. They are established as central systems in all industrial sectors. Highest quality and process reliability charaterise the open and contamination-free systems, which can be designed with numerous options for special performance requirements and operating conditions.

Testing CHT 15 (-45...+130°C)

Testing CHT 20 (-45...+130°C)

Testing CHT 30 (-45...+130°C)

TK- 90-9-50 SN 191064

SN: 191065 Type: Rental Unit Technical data: Temperature max: 90 °C Medium: Water Heating capacity: 9 kW Cooling capacity: 50 kW Max. flow rate: 54 ltr/min Max. delivery pressure: 6 bar Functional equipment hydraulic: - Bypass between flow and return with reduced cross-section - Level monitoring via magnetic float switch - Flow pressure display via pressure gauge on the rear of the device - Flow monitoring by recording the film temperature, temperature safety device in heater - Dirt trap in the cooling water supply and in the return of the circulation system - Insulation of all heat-bearing hydraulic components - Bypass between cooling water inlet and outlet Function Electrical equipment: - Smart Controller regulation and control unit (7” touch display) - Hybrid SSR heating control - IP54 switch box, externally ventilated General equipment: - Corrosion-resistant components stainless steel, non-ferrous metal - Heating via stainless steel tubular heating elements made of Incoloy

TK-90-6-24 SN 202142

Model: TK-90-6-24 SN: 202142Type: Rental device Technical Data: Temperature max: 90 °C Medium: Water Heating capacity: 6 kW Cooling capacity: 24 kW Max. flow rate: 40 ltr/min Max. delivery pressure: 3.8 bar Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Switchover option: Manual filling (at the filler neck) / automatic filling via cooling water (via separate filling connection with dirt trap, if without cooling) - Level monitoring via magnetic float switch - Dirt filter in the cooling water inlet and in the return of the circulation system - Reversing circuit for leak-stop operation (not applicable with return flow protection and tool emptying compressed air) Function Electrical equipment: - SBC-T regulation and control unit (3.5” touch display) - Hybrid SSR heating control (up to 415V), above SSR - IP54 switch box General equipment: - Corrosion-resistant components (VA, MS) - Heating via stainless steel tubular heating elements made of Incolloy - Device mounted on castors and ready for connection Selected options: - Backflow protection via solenoid valve in the return and flow with non-return valve - SBC-Tplus package / flow measurement - Overflow valve between flow and return - Housing in VA glass bead blasted complete housing incl. switch box

Used Compact TK 90-6-24 SN202143

Model: Compact TK 90-6-24 Type: Rental unit Year of manufacture: 2020 Serial number: 202143 TECHNICAL DATA Temperature: 90 °C Medium: Water Heating capacity: 6 kW Cooling capacity: 24 kW Max. flow rate: 40 l/min Max. delivery pressure: 3.8 bar Dimensions: 639mm x 266mm x 562mm Weight: 50 kg EQUIPMENT - SBC-T plus controller - Backflow protection - Overflow valve - Flow measurement

Used TK 90-9-50 SN182152

Model: TK 90-9-50 Type: Rental machine Year of manufacture: 2018 Serial number: 182152 TECHNICAL DATA Temperature: 90 °C Medium: Water Heating capacity: 9 kW Cooling capacity: 50 kW Max. flow rate: 58 l/min Max. delivery pressure: 5.2 bar Dimensions: 639 mm x 266 mm x 562 mm Weight: approx. 50 kg EQUIPMENT - SBC-Tplus controller - Flow measurement - Suction mould emptying (M.TDS.TK) - Suction of the external consumer - 16 A plug / CEE completely mounted (E.PSC16.TK) - Current interface 20mA TTY; protocol selectable Arburg,Engel KraussMaffei,Bühler,Dr.Boy Single via 9-pin D-Sub connector (SBC-T.IFTTY) Engel

Variotherm ATT H (200 °C)

Variotherm temperature control used in combination with suitable mould inserts allows variations in temperature of more than 100 °C in critical areas or in complete moulds. In order to achieve this, the SINGLE ATT system operates with two separate circuits that contain thermal fluid with a different temperature. Both ATT circuits contain the same fluid. Water is recommended for temperatures of up to 200 °C, while oil is suitable for applications that operate with temperatures of up to 300 °C.

Variotherm ATT N1 (180 °C)

Variotherm ATT S (180 °C)

Water Advanced G / 90 - 150 - 160 °C

SINGLE water-operated temperature control systems up to 180°C As part of Water Advanced product family, the all-purpose, high-temperature water-operated temperature control systems of the N-G and H product lines are equipped for operation far above the atmospheric boiling point with temperatures of up to 225 °C. With their wide temperature and dimensional range which covers medium to very large capacities, they provide the basis for numerous special projects. Thanks to their high reliability and precision and virtually unlimited application options they meet a variety of requirements.Compared to heat transfer oil, the use of water as a circulating medium provides several physical and economic benefits – particularly when operating with higher temperatures. In addition to the benefits mentioned above, superior pump technology enhances the economic advantages of the Water Advanced product family. The systems are mainly equipped with high-quality, multi-stage centrifugal pumps with a high level of efficiency, which can directly affect the system’s energy consumption.

Water Advanced G2 / 90 - 150 - 180 °C

SINGLE water-operated temperature control systems up to 180°C As part of Water Advanced product family, the all-purpose, high-temperature water-operated temperature control systems of the N-G and H product lines are equipped for operation far above the atmospheric boiling point with temperatures of up to 180 °C. With their wide temperature and dimensional range which covers medium to very large capacities, they provide the basis for numerous special projects. Thanks to their high reliability and precision and virtually unlimited application options they meet a variety of requirements.Compared to heat transfer oil, the use of water as a circulating medium provides several physical and economic benefits – particularly when operating with higher temperatures. In addition to the benefits mentioned above, superior pump technology enhances the economic advantages of the Water Advanced product family. The systems are mainly equipped with high-quality, multi-stage centrifugal pumps with a high level of efficiency, which can directly affect the system’s energy consumption.

Water Advanced High Temp H0 / 200 °C

SINGLE water-operated temperature control systems up to 200°C As part of Water Advanced product family, the all-purpose, high-temperature water-operated temperature control systems of the N-G and H product lines are equipped for operation far above the atmospheric boiling point with temperatures of up to 200 °C. With their wide temperature and dimensional range which covers medium to very large capacities, they provide the basis for numerous special projects. Thanks to their high reliability and precision and virtually unlimited application options they meet a variety of requirements.Compared to heat transfer oil, the use of water as a circulating medium provides several physical and economic benefits – particularly when operating with higher temperatures. In addition to the benefits mentioned above, superior pump technology enhances the economic advantages of the Water Advanced product family. The systems are mainly equipped with high-quality, multi-stage centrifugal pumps with a high level of efficiency, which can directly affect the system’s energy consumption.

Water Advanced High Temp HK / 225 °C

SINGLE water-operated temperature control systems up to 225°C As part of Water Advanced product family, the all-purpose, high-temperature water-operated temperature control systems of the N-G and H product lines are equipped for operation far above the atmospheric boiling point with temperatures of up to 225 °C. With their wide temperature and dimensional range which covers medium to very large capacities, they provide the basis for numerous special projects. Thanks to their high reliability and precision and virtually unlimited application options they meet a variety of requirements.Compared to heat transfer oil, the use of water as a circulating medium provides several physical and economic benefits – particularly when operating with higher temperatures. In addition to the benefits mentioned above, superior pump technology enhances the economic advantages of the Water Advanced product family. The systems are mainly equipped with high-quality, multi-stage centrifugal pumps with a high level of efficiency, which can directly affect the system’s energy consumption.

Advanced Water WP7 / 90-150-180-200 °C

The water temperature control systems of the WP7 series up to 200 °C are the core of the product range. The universal applications of the WP7 series range from injection moulding to extrusion.Energy-efficient and CO2-saving This product is labeled with our green leaf, which stands for high energy efficiency and CO2 savings. Further information can be found under the following link: Learn more

Water Mini M2 / 90 °C

The extraordinarily compact mini water-operated temperature control systems of the Water Mini product family are specially designed for small and laboratory applications with relatively low capacity requirements. If required, they can be combined to form multi-circuit temperature control systems.

WK3-160-9-50 SN 192969

SN: 192970 Type: Rental appliance Technical data: Temperature max: 160 °C Medium: Water Heating capacity: 9 kW Cooling capacity: 50 kW Max. flow rate: 57 ltr/min Max. delivery pressure: 6 bar Functional equipment hydraulic: - Bypass between flow and return with reduced cross-section - Level monitoring via magnetic float switch - Flow pressure display via pressure gauge on the rear of the device - Flow monitoring by recording the film temperature, temperature safety device in heater - Dirt trap in the cooling water supply and in the return of the circulation system - Insulation of all heat-bearing hydraulic components - Bypass between cooling water inlet and outlet Function Electrical equipment: - Smart Controller regulation and control unit (7” touch display) - Hybrid SSR heating control - IP54 switch box, externally ventilated General features: - Corrosion-resistant components stainless steel, non-ferrous metal - Heating via stainless steel tubular heating elements made of Incolloy Selected options: - Booster pump to increase make-up pressure (M.BP.WK3) - Pressure gauge on the flow (M.PG1.WK3) - Professional package consisting of: (PRO.WK3) Smart Controller plus, frequency converter and pressure transducer, ext. PT100, Return temperature display, flow measurement If a residual current device (RCD) is provided on site, type B must be used. If the rated current of the RCD is 30mA, only one temperature control system can be operated via one RCD. - Suction tool emptying (M.TDS.WK3) Suction of the external consumer - 16 A plug / CEE completely mounted (E.PSC16.WK3) - Continuous bypass of the heat exchanger (M.CB.WK3) with 3-way valve - Current interface 20mA Arburg via 9-pin D-Sub connector (SSC.IFARBURG)

WK3-160-9-50 SN 192970

WK3-180-9-50 SN 192564

SN: 192564 Type: Rental appliance Technical Data: Temperature max: 180 °C Medium: Water Heating capacity: 9 kW Cooling capacity: 50 kW Max. flow rate: 38 ltr/min Max. delivery pressure: 5 bar Functional equipment hydraulic: - Bypass between flow and return with reduced cross-section - Level monitoring via magnetic float switch - Flow pressure display via pressure gauge on the rear of the device - Flow monitoring by recording the film temperature, temperature safety device in heater - Dirt trap in the cooling water supply and in the return of the circulation system - Insulation of all heat-bearing hydraulic components - Bypass between cooling water inlet and outlet Function Electrical equipment: - Smart Controller regulation and control unit (7” touch display) - Hybrid SSR heating control unit - IP54 switch box, externally ventilated General equipment: - Corrosion-resistant components stainless steel, non-ferrous metal - Heating via stainless steel tubular heating elements made of Incoloy Selected options: - Pressure gauge on the flow (M.PG1.WK3) - Booster pump to increase make-up pressure (M.BP.WK3) - Continuous bypass of the heat exchanger (M.CB.WK3) with 3-way valve - Professional package consisting of: (PRO.WK3) - Smart Controller plus, frequency converter and - pressure transducer, ext. PT100, - Return temperature display, - flow measurement - Ecotemp (M.ECO.WK3) - Cyclical switchover from external operation to bypass operation - Potential-free signal from external to 3-pin HARTING plug connection for spray cycle Optional normal operation / EcoTemp operation - Current interface 20mA TTY; protocol selectable Arburg,Engel KraussMaffei,Bühler,Dr.Boy Single via 9-pin D-Sub connector (SSC.IFTTY) Engel KraussMaffei,Bühler,Dr.Boy Single via 9-pin D-Sub connector

WP4-90-18-120/D SN 200849

Model: Advanced WP4-90-18-120/D SN 200849 SN: 200849 Type: Rental unit Technical Data: Temperature max: 90 °C Medium: Water Heating capacity: 18 kW Cooling capacity: 120 kW Max. flow rate: 73 ltr/min Max. delivery pressure: 7.5 bar Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Configurable automatic filling via KW inflow or separate connection (factory-fitted via cooling water inflow) - Flow measurement using the differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system closure (not with WP4-90) - Flow monitoring by recording the flow rate - Bypass between flow and return with reduced cross-section - Dirt filter in the cooling water supply, filling and return of the circulation system - Continuous bypass of the heat exchanger via 3-way motorized control valve (WP4-180/200) - System pressure monitoring via pressure transmitter in the AD tank (WP4- 150/180/200) (only in conjunction with Smart Controller) - Booster pump for system filling (WP4-180/200) - Safety temperature limiter (STL) in the heater (WP4-200) - Pressure gauge in the flow on the rear of the appliance - Circulation circuit thermally insulated (WP4-150/180/200) Function Equipment electr: - Smart Controller regulation and control unit (7” touch display) - Heating control via solid-state relay - IP54 switch box, externally ventilated

WP5 150-24-220 SN 230704

Model: WP5-150-24-220 SN: 230704 Type: Rental unit Technical data: Temperature max: 150° Medium: Water Heating capacity: 24 kW Cooling capacity: 220 kW Max. delivery rate: 141/min Max. delivery pressure: 7.5 bar Dimensions: 1465mm x 485mm x 1090 mm Weight approx.: 220 kg Functional equipment hydraulic: - Bypass between flow and return with reduced cross-section - Level monitoring via magnetic float switch - Flow pressure display via pressure gauge on the rear of the device - Flow measurement using the differential pressure principle - Flow monitoring by recording the film temperature and the flow rate - Dirt filter in the cooling water supply and in the return of the circulation system - Circulation circuit thermally insulated Electrical functional equipment: - Smart Controller regulation and control unit (7” touch display) - SSR heating control - IP54 switch box, externally ventilated General equipment: - Stainless steel expansion tank, heater and piping - Heating via stainless steel tubular heating elements made of Incolloy - Dirt trap (circulation) Selected options: - Pressure gauge (M.PG1.WP5) - Professional package (PRO.WP5) Smart Controller plus, frequency converter and pressure transducer If a residual current device (RCD) is provided on site, type B must be used If the rated current of the RCD is 30mA, only one temperature control system can be operated via one RCD. - Profibus DP interface via 9-pin D-Sub connector

WP5 150-48-220 SN202358

Model: WP5 150-48-220 SN202358 SN: 202358 Typ: Rental Technical Data: Temperature max: 150 °C Medium: Water Heating capacity: 48 kW Cooling capacity: 220 kW Max. flow rate: 73 ltr/min Max. delivery pressure: 7.5 bar Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Configurable automatic filling via KW inflow or separate connection (factory-fitted via cooling water inflow) - Flow measurement using the differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system closure (not with WP5-90) - Flow monitoring by recording the film temperature and the flow rate - Bypass between flow and return with reduced cross-section - Dirt filter in the cooling water supply, filling and return of the circulation system - Continuous bypass of the heat exchanger via 3-way motorized control valve (WP5-180/200) - System pressure monitoring via pressure transmitter in the AD tank (WP5-150/180/200) (only in conjunction with Smart Controller) - Booster pump for system filling (WP5-180/200, optional for WP5-150) - Safety temperature limiter (STB) in the heater (WP5-200) - Pressure gauge in the flow on the rear of the appliance - Circulation circuit thermally insulated (WP5-150/180/200) Function Equipment electr: - Regulation and control unit Smart Controller (7” touch display) - Heating control via solid-state relay - IP54 switch box, externally ventilated General equipment: - Stainless steel expansion tank, heater and piping - Heating via stainless steel tubular heating elements made of Incolloy - Strainer (circulation): 1.4408 - Device ready for connection and mounted on castors Selected options: - Cooling via pneumatic angle seat valve in the cooling water inlet - EcoTemp system - More powerful pump

WP7-150-54-0 SN 230169

WP7-150-54-0 SN 230169 Temperature range up to °C 150 Heating capacity in kW 54 Cooling capacity in KW 0 Max. pressure in bar 4,7 Delivery rate (l/min) 230 Product information Model: WP7-150-54-0 Medium: Water Type: Rental device Year of construction: 2023 Serial number: SN 230169 Equipment Hydraulic functional equipment: - Bypass between flow and return with reduced cross-section - Level monitoring via magnetic float switch - Flow pressure display via pressure gauge on the rear of the device - Flow monitoring by recording the flow rate - Dirt filter in the cooling water supply and in the return of the circulation system - Circulation circuit thermally insulated Electrical functional equipment - Smart Controller regulation and control unit (7” touch display) - SSR heating control unit - IP54 switch box, externally ventilated General equipment - Stainless steel expansion tank, heater and piping - Heating via stainless steel tubular heating elements made of Incolloy - Dirt trap

WT3 90-4-50 SN231755

Temperature range up to °C 90 Heating capacity in kW 4 Cooling capacity in KW 50 Max. pressure in bar 3,8 Delivery rate (l/min) 40 Product information Model: WT3 90-4-50 / WT3.000061 Type: Used unit / rental unit Year of manufacture: 2020 Serial number: 231755 Equipment: Hydraulic Hydraulic functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water (via separate filling connection with dirt trap, if without cooling) - Level monitoring via magnetic float switch - Dirt filter in the cooling water inflow and in the return of the circulation system - Reversing circuit for leak stop operation (not applicable for return flow protection and mould draining compressed air) Electrical functional equipment - SBC-T regulation and control unit (3.5’ touch display) - Hybrid SSR heating control (up to 415V), above SSR - Control box IP54 General equipment - Corrosion-resistant components (VA, MS) - Heating via stainless steel tubular heating elements made of Incolloy - Device mounted on castors and ready for connection - Insulation around tank and heat exchanger foamed material

WT4 90-24-80 SN 240663

SN: 240663 Type: Prototype Technical data: Temperature max: 90 °C Medium: Water Heating capacity: 24 kW Cooling capacity: 80 kW Max. flow rate: 67 ltr/min Max. delivery pressure: 5.2 bar Hydraulic functional equipment: - Level monitoring by magnetic float switch - Dirt trap in the cooling water inlet and in the return of the circulation system - Dirt trap in automatic filling Function Electrical equipment: - Smart Controller regulation and control unit (7” touch display) - SSR heating control unit - IP54 switch box, externally ventilated General equipment: - Corrosion-resistant components made of stainless steel, non-ferrous metal - Heating via stainless steel tubular heating elements made of Incoloy Selected options: - Advanced package (ADV.WT4) - Tool emptying by means of compressed air (M.TDA.WT4) - Current interface 20mA TTY; protocol selectable Arburg,Engel KraussMaffei,Bühler,Dr.Boy Single via 9-pin D-Sub connector (SSC.IFTTY) Engel KraussMaffei,Bühler,Dr.Boy Single via 9-pin D-Sub connection - 63 A plug / CEE completely mounted (E.PSC63.WT4) - Return flow protection via solenoid valve in the return flow (M.RFS.WT4) - Overflow valve between flow and return (M.OV.WT4) - Frequency converter driven valve (FC1.WT4) - Cooling with pneumatic (M.PCV.WT4) - Filling nozzle (M.FN.WT4) - Pressure sensor in the flow for pressure display on the regulator (M.PI1.WT4)

WT4 90-24-80 SN 240664

SN: 240664 Type: Prototype / Exhibition unit Technical Data: Temperature max: 90 °C Medium: Water Heating capacity: 24 kW Cooling capacity: 80 kW Max. flow rate: 54 ltr/min Max. delivery pressure: 3.8 bar Hydraulic functional equipment: - Level monitoring by magnetic float switch - Dirt trap in the cooling water inlet and in the return of the circulation system Function Electrical equipment: - SBC-T regulation and control unit (3.5” touch display) - SSR heating control unit - IP54 switch box, externally ventilated General equipment: - Corrosion-resistant components made of stainless steel, non-ferrous metal - Heating via stainless steel tubular heating elements made of Incoloy Selected options: - Filling nozzle (M.FN.WT4) - 32 A plug / CEE fully assembled (E.PSC32.WT4)